Tag: IS200STCIH6AED

IS200STCIH6A DIN-RAIL Contact Terminal Board Equipment Which part of the Product number discloses Group 6 for DIN IS200STCIH6A DIN-RAIL Contact Terminal Board equipment?

As you may have guessed, the unit’s H6 Series group label is responsible for the Group 6 Mark VI Series classification of IS200STCIH6A DIN Rail contact terminal boards.
Why does A single Class A revision of this IS200STCIH6A DIN Rail contact terminal board device work?

This revised version of the IS200STCIH6A DIN Rail Contact Terminal Board product is functional in that it focuses solely on improving the basic performance specifications and overall functional quality of the IS200STCIH6A DIN Rail Contact terminal Board device.
About IS200STCIH6A
The IS200STCIH6A is a DIN rail contact terminal board for GE Mark VI series turbine control systems. The Mark VI fan control system family of IS200STCIH6A DIN Rail contact terminal board devices has a specific set of possible functional product applications in popular and GE compatible control and management systems for automatic drive components for gas, steam and wind turbines. It must be emphasized that this is a comprehensive functional upgrade to the previously established industry standard similar to the full extended product family title in the Mark V turbine control System family, as the Mark VI series adds more possible functional applications for alternative energy based wind turbines in steam and natural gas applications. This was made possible early on with the introduction of the basic Mark V. This IS200STCIH6A DIN Rail contact terminal board product is covered by warranty upon purchase of AX.

Hardware tips and specifications

The IS200STCIH6A is a printed circuit board (PCB) with many different components. On the left and right sides of the board are two large nickel-sized factory drill holes. There are also two factory drilled reinforcement terminal holes in the lower left and right corners of the board. Next to the bottom hole are two terminal strips with numerical markings. The top is labeled 1-51 and contains only odd numbers, while the bottom is labeled 2-52 and contains all even numbers. The top center edge of the board has an RS-232 37-pin female port. The board’s part number label is located in the lower right corner of the board, between the corner and the plant drill hole. There is a white 3-pin jumper just above the top terminal board on the left side of the board. The PCB also contains 2 transistors, 91 resistors, 27 diodes and 24 capacitors. This IS200STCIH6A DIN rail contact terminal board device is not actually a General Electric product originally designed for its specific intended role as a Mark VI turbine control system family of functional products. This is true because it must be considered A single Class A functional product revision of the IS200STCIH6 parent DIN rail contact terminal board, especially one that does not utilize this IS200STCIH6A DIN rail contact terminal board device.

IS200STCIH6A is a PCB and should be handled with care. Anti-static procedures should be implemented to prevent any type of damage to the board due to the build-up and release of static electricity. The board should be kept in an anti-static bag or box until it can be installed. When installing the IS200STCIH6A, wear an ESD wrist strap.