IC693CPU351-HT|Single-slot modular CPU
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part number IC693CPU351
Product Description Modular CPU
Product Type CPU module
User memory 240 KB
Compatibility GE Fanuc 90-30 Programmable controllers
Processor type 80386EX
Clock speed 25 megahertz
Typical scan rate is 0.22 ms per 1K Boolean logic
Serial port 3
The processor speed is 25 MHZ
The GE Fanuc 90-30 module with directory number IC693CPU351 is part of the modular CPU subclass. The CPU is designed for applications that require higher complexity, faster processing speed, and support for large amounts of I/O. The CPU module is a single-slot CPU module that can be mounted to CPU baseboards in slots 5 or 10. The IC693CPU351 specifically supports a large number of I/ OS, 2048 discrete input points (%I); 2048 discrete output points (%Q) and analog I/O words, varying depending on the software used, however, each has a maximum configurable analog I/O of 32, 640 words. The number of other internal registers available for this CPU is 1280 bits of binary global memory; 4096-bit storage coil; 256-bit temporary output coil; 128-bit system state reference; Register memory of up to 32,640 words and system registers of 28,000 words can only be used for reference table viewing. The modular CPU can be configured to communicate and perform I/O data exchange between I/O expansions or remote I/O backboards. Specifically, seven (7) and/or I/O expansion or remote I.O baseboards. For communication with visualization systems such as Human Machine Interface (HMI) or Supervisory Control and Data Acquisition systems (SCADA) and other automation devices, the IC693CPU351 provides three (3) serial ports. One (1) serial port is located on a power connector that supports SNP/SNPX slave stations, while ports 1 and 2 support RTU slave stations and SNP/SNPX master/slave protocols. The modular CPU also supports the installation of communication modules.
The GE Fanuc IC693CPU351 CPU is a modular CPU module. The IC693CPU351 CPU was developed for the 90-30 series Programmable Logic controller (PLC) system. The CPU has a clock speed of 25 megahertz. The processor type is 80386EX processor. The IC693CPU351 CPU is part of the GE350 to 364 CPU family, which was developed specifically to meet customer needs for faster processing speeds and increased memory size. The IC693CPU351 CPU is supported by Logicmaster microprogramming and configuration software versions 90-30, 6.0 and higher, and control programming and configuration software versions 2.0 and higher. The user memory on the IC693CPU351 CPU is 240 KB (supported by CPU firmware 9.0 and later). For firmware before version 9.0, the CPU module memory size is 80 KB. The IC693CPU351 CPU does not support an embedded Ethernet port, but there are three built-in serial ports on the CPU module. Optional communication modules available for the IC693CPU351 CPU include Profibus, GBC, Ethernet, GCM, and GCM+ modules. The IC693CPU351 CPU supports floating point math functions. The IC693CPU351 CPU also provides a key switch. A sequential event logger is also provided on this module. The internal coil on the module is rated at 4096 bits and the output (temporary) coil is rated at 256 bits. The power supply of the IC693CPU351 CPU is required to be 5 volts DC and 890 mA. Battery powered clock and override are available on the IC693CPU351 CPU. Operating temperature range is 32 to 140 degrees Fahrenheit.