Brand GE Fanuc
Series Series 90-30
Part number IC693CPU350
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Serial port RS-485 (via power supply)
CPU Type Single-socket CPU module
User memory 32K bytes
Processor type 80386EX
The power supply requires 670 MA from a +5 VDC power supply
Typical scan rate 0.22 ms per 1K logic (Boolean contacts)
Memory Storage types RAM and flash
The number of Ethernet ports is not applicable
Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)

The IC693CPU350 is a GE Fanuc series 90-30 controller. The controller is part of a modular control system with a single slot-wide module capable of controlling up to eight (8) backboards, including the local backboard where the CPU is installed.

The IC693CPU350 is designed with 32K bytes of non-configurable user memory. Up to 2048 discrete inputs, 2048 discrete outputs, 2048 analog input words and 512 analog output words. This I/O count density makes the controller eligible for installation in medium to large sized applications.

The IC693CPU350 does not have a communication port. The controller utilizes a communication port installed in the power supply, which is an RS485 communication interface that allows connection to programming workstations, handheld programmers (HHP), and devices capable of exchanging data over the RS485 communication standard. This port supports the SNP/SNP-X slave protocol.

The IC693CPU350 is configured with various options. It can be configured using LogicMaster90, Control, VersaPro, and CIMPLICITY Machine Edition Logic Developer applications. In addition, a traditional handheld programmer (HHP) can be used to write programs to this controller.

The IC693CPU350 has an internal processor, 80386EX, with a typical sweep rate of 0.22 milliseconds per 1K logic for Boolean contacts and a processing speed of 25 MHz. The controller supports override functionality, interrupts via periodic subroutines, PCM/CCM compatibility, and floating-point math. Additional communication modules supported by IC693CPU350 Optional communication protocols after installation include Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.

The IC693CPU350 CPU is a single-slot CPU module. Each system has eight backboards, including CPU backboards and seven extension or remote backboards. The IC693CPU350 CPU requires 670 mah of current and 5 volts of DC input. The typical scan rate for CPU modules is 0.22 milliseconds per 1 KB of logic. The maximum user program memory is 32 KB. The capacity of the discrete input point is 2048 words, and the capacity of the discrete output point is 2048 words. The discrete global memory is 1280 bits. Register memory is 9999 words. Analog inputs and outputs are rated at 2048 words and 512 words, respectively. The system register is 28 words. The IC693CPU350 CPU supports more than 2000 timers and counters. The CPU module also supports Shift registers. The IC693CPU350 CPU has an integrated serial port that supports SNP/SNPX slave protocols. The serial port requires a PCM module to support the RTU master, and a CMM module to support the SNP/SNP-X master, RTU slave protocol, or CCM. Both flash and RAM memory can be used in the IC693CPU350 CPU. The IC693CPU350 CPU also supports floating point math. The operating temperature range of the IC693CPU350 CPU is 0 to 60 degrees Celsius.